Choose your wash, steam and dry, then press play. Your machine always runs Wash, Sterilise, Dry, Store, in that order.
| Cycle | Time | Temperature | What it does |
|---|---|---|---|
| Quick Wash | 19 min | 50°C | 1 wash, 1 rinse |
| Deep Clean | 36 min | 60°C | 1 wash, 5 min Steam Boost, 2 rinses |
| Steam | 10 min | 100°C | Steam sterilisation |
| Dry | 45 / 60 / 75 / 90 min | 72°C | Heated air, HEPA H13 filtered, you choose the length |
Press Wash, Steam and Dry in any combination. Each press adds that cycle, and its time, to the display. The display shows the total time before it starts. Tap Power/Play to begin.
When a run that includes Dry finishes, 3 short beeps, the lights go out, the Storage icon comes on and the display shows 72. Bottles are kept sterile for 72 hours with the lid closed.
After the run finishes, the machine empties the tank and its own pipework. This takes up to 2.5 minutes and the buttons will not respond. Let it finish. It keeps standing water out of a machine that cleans your baby's bottles.
| Cycle | Time | Temperature | What it does |
|---|---|---|---|
| Quick Wash | 19 min | 55°C | 1 wash, 1 rinse |
| Deep Clean | 29 min | 68°C | 1 wash, 2 rinses |
| Sterilise | 10 min | 100°C | Steam sterilisation |
| Dry | 45 min | 62°C | Heated air, HEPA H13 filtered |
Tapping Deep Clean selects the one-touch default: Deep Clean, Sterilise and Dry together. Deselect Sterilise and Dry to run Deep Clean alone.
no documented end-of-cycle drain duration for Clean (v1). Do not assume the Clean Max figure applies.